What are the causes and solutions for the damage to the coil of the good price and quality 300A DC Contactor

Categories:300A DC Contactor
Author:
Origin:
Time of issue:2022-06-23
Views:0

(Summary description)In the installation environment, humid air or corrosive gas may damage or leak the coil of the good price and quality 300A DC Contactor. The treatment method is to replace the special insulating coil and take measures to prevent moisture and corrosion.

What are the causes and solutions for the damage to the coil of the good price and quality 300A DC Contactor

In the installation environment, humid air or corrosive gas may damage or leak the coil of the good price and quality 300A DC Contactor. The treatment method is to replace the special insulating coil and take measures to prevent moisture and corrosion.





What are the causes and solutions for the damage to the coil of the good price and quality 300A DC Contactor

(Summary description)In the installation environment, humid air or corrosive gas may damage or leak the coil of the good price and quality 300A DC Contactor. The treatment method is to replace the special insulating coil and take measures to prevent moisture and corrosion.

Categories:300A DC Contactor
Author:
Origin:
Time of issue:2022-06-23
Views:0

1. The coil voltage of the good price and quality 300A DC Contactor is lower than the mains voltage. The workaround is to replace it with a matching coil.
2. In the installation environment, humid air or corrosive gas may damage or leak the coil of the good price and quality 300A DC Contactor. The treatment method is to replace the special insulating coil and take measures to prevent moisture and corrosion.

3. Short circuit between turns. The solution is to replace the coil of the good price and quality 300A DC Contactor.
4. The working frequency is too high. The solution is to extend the working interval or replace the coil or 300A DC Contactor suitable for higher working frequency.
5. The magnetic pole surface of the AC iron core is uneven or the residual magnetic gap is too large, which causes the coil of the good price and quality 300A DC Contactor to heat up. The repair method is to clean the pole face or replace the iron core.
6. The double-winding coil of the good price and quality 300A DC Contactor is stuck due to the long-term adhesion of the closed auxiliary contact, and the starting winding is energized and heated for a long time. The repair method is to replace the self-locking contacts of the good price and quality 300A DC Contactor and eliminate the cause of the contact welding.