新闻资讯

27

2020-10

PV and Wind Energy

　　PV power generation is to convert the luminous energy to electric energy through the solar panel. The output of solar panel is direct current and the current output will be stored through the storage battery, providing electricity to load. There are two types of power supplying method, one is DC power supply and the other is AC power supply through the inverter. PV power generation system con- sists of solar battery, solar controller, storage battery (unit) and inverter. High-voltage DC contactor is mainly used at DC end in the PV power generation system, and storage battery and inverter are mainly used to switch to DC load. The general voltage range is 400-1000VDC and the current range is 10-120ADC. The fundamental principle for wind power generation is to convert the energy of wind to mechanical energy through wind wheel and then switch to the electricity by generator. There are 3 kinds of generators available for the wind power generation, which are DC generator, synchronous and asynchronous AC generator. The electricity generated by wind power generator is generally not able to be applied to the circuit and shall be stored firstly. In the system of the wind power generator, the high-voltage DC contactor is mainly applied to the output terminal of DC and the input/output terminal of energy-storage battery. The general voltage range is 700-1000- VDC and the range for current is 100-200ADC.    

2020-10-27

PV and Wind Energy

27

2020-10

Energy Storage

　　Energy storage technology mainly refers to the storage of the electricity. The energy stored can be used as the emergency energy and can also be stored while the load of grid is low. When the load of grid is high, the energy stored can be used for peak-load shifting, alleviating the fluctuation of the grid. In the system of the energy storage, the high-voltage master DC contactor is mainly applied to the DC conversion of DC terminal, storage battery and inverter. The general voltage range is 750-1000VDC and the current range is100-300ADC.

2020-10-27

Energy Storage

27

2020-10

Charging Equipment

At present, there are mainly two kinds of charging facilities for electro-mo-bile, which are charging station and charging pile. The role for the DC contactor is to switch to the DC power supply. 1.Centralized charging is adopted by the charging stations, which can charge for multiple new energy vehicles. It is normally applied to charge for the public utility and new energy bus. The battery can be dismantled and sent to the large-scale charging station for recharge. 250-350A products are normally used for charging stations. 2.Charging piles mainly distribute to the community or parking lot of the office building, which are normally applied to charge for the personal new energy vehicles. 40-200A products are normally used for charging piles. F.30A-300A products are generally used. XGE8-30、XGE8-50、XGE8- 100、XGE8-150、XGE8-200、XGE8300 ;XGE6- 40、XGE6- 100、XGE6-150、XGE6- 200、XGE6-300.    

2020-10-27

Charging Equipment

27

2020-10

New Energy Vechicles

New energy vehicleis one of the leading application fields for the DC contactor. At present, the new energy vehicles mainly refer to the HEV, PHEV/PEV, EV, FCVand solar powered automobile. A.Master contactor XGE6V-400、XGE6V-300、XGE6V-200、XGE6V-150、XGE6V-100; B.Pre-charge contactor XGE6V-10、XGE6V-20、XGE6V-40; C.Quick charging contactor XGE6V-100、XGE6V-150、XGE6V-200; D.Normal charging contactor XGE6V-10、XGE6V-20、XGE6V-40; E.Auxiliary contactor for high-voltage system XGE6V-10、XGE6V-20、XGE6V-40；   There are four functional modules that require DC contactor for the new energy vehicles. 1.The contactor for DC voltage control system: It generally refers to the high current specification( 80-500ADC), which are mainly used to discon-nect the battery. 2.The contactor for normal/quick charging system: The general current specification is 32-300ADC. 3.The contactor for insulation protection/safety control and high-voltage auxiliary system: It mainly applies to the typical load, such as air conditioner, heating, DC/DC inversion and so on. 4.The contactor for high-voltage pre-charging system (HV): The general current specification is 10-20ADC.  

2020-10-27

New Energy Vechicles

25

2020-10

The development of new energy vehicles is the only way for my country to move from a major automobile country to a powerful automobile country. With the batch of foreign new energy vehicles...

The development of new energy vehicles is the only way for my country to move from a major automobile country to a powerful automobile country. With the batch of foreign new energy vehicles...

2020-10-25

25

2020-10

The development of new energy vehicles is the only way for my country to move from a major automobile country to a powerful automobile country. With the batch of foreign new energy vehicles...

The development of new energy vehicles is the only way for my country to move from a major automobile country to a powerful automobile country. With the batch of foreign new energy vehicles...

2020-10-25

< 1...23242526 >

SAF Coolest v1.3.1.2 设置面板RFISX-AGDT-MZXAE-ADW

违禁词： First, best, first-class, leading, unique, king, leader, extreme, internationally renowned, national,

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用