What is the installation method of the cheap 300A DC Contactor near me
Release time:
2022-11-22 08:00
Before installing the cheap 300A DC Contactor near me, first check whether the technical data such as the rated voltage of the coil are consistent with the actual use, and then wipe off the rust-proof oil or rust on the iron core and surface of the cheap 300A DC Contactor with gasoline to avoid damage after repeated use, or grease Sticking makes it impossible to release the shock when the contactor is de-energized.
When installing a cheap 300A DC Contactor near me, it should generally be installed vertically, and the inclination should not exceed 5°, otherwise it will affect the action characteristics of the contactor. When installing some cheap 300A DC Contactor with heat dissipation holes, the heat dissipation holes should be set at the upper and lower positions to facilitate the heat dissipation of the coil.
When installing and wiring the cheap 300A DC Contactor near me, be careful not to let sundries fall into the contactor, so as not to cause jamming and burn out the coil. Anti-vibration loose. After installation, check whether the wiring of the cheap 300A DC Contactor is good. When the main contact is not energized, first energize the pull-in coil, switch on and off several times to check whether the action of the DC Contactor is reliable, and then it can be put into use.
Contact Us
Address: 2106 Nanfeng Highway, Fengxian District, Shanghai
Focus on us
SAF Coolest v1.3.1.2 设置面板 RFISX-AGDT-MZXAE-ADW
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page